Nidec FGV-HXY, Operation Manual

Page: 13 / 34

-12-
Press ZERO key to memorize the set value and come back from function mode to standard
measuring mode.
In order to cancel the change of function mode, press POWER key, then turn the POWER off.
5.8.Function mode-end
It's available to set PEAK signal mode.
Press the UNIT key to switch the PEAK signal mode. Press PEAK key to go back to f01.
5.7 PEAK signal mode: f07
Key operation Display
PEAK
ZERO
MEM
UNIT
Press UNIT to cycle
through settings
ZERO
Save current setting and return to the standard measuring mode.
PEAK Save the change and then move to f01.
Not available PEAK signal PEAK signal mode: +PEAK PEAK signal mode: -PEAK
Key Operation
POWER Turn the POWER ON/OFF
ZERO Tare (Peak reset at the PEAK Hold mode)
PEAK Standard measuring mode / Plus peak hold mode / Minus peak hold mode
UNIT Change the unit
MEM Store the measuring data into memory
Key Operation How to operate
PEAK + UNIT
POWER
Tracking
ON / OFF
Turn POWER off. Press PEAK key and UNIT key simultaneously and hold, then
press and release POWER key (release the PEAK key and UNIT key after the value
appears in the display more than 1 second.)
ZERO +
POWER
Function mode
Turn POWER off. Press ZERO key and hold, then press POWER key and release
(release ZERO key after the value appears in the display more than 1 second).
Function mode;
UNIT: Change the setting content
PEAK: Switch the function
ZERO: Register the setting content
UNIT +
POWER
Reverse display
Turn POWER off. Press UNIT key and hold, then press POWER key and release
(release the UNIT key after the value appears in the display more than 1 second.)
MEM +
POWER
Display memory data
Turn POWER off. Press MEM key and hold, then press POWER key and release
(release MEM key after the value appears in the display more than 1 second.)
Display memory data;
UNIT: Display the statistical data
PEAK: Memory data display end
ZERO: Delete one memory data
Hold ZERO key to delete all data
MEM: Next memory data
PEAK +
POWER
Comparator
memory mode setting
Turn POWER off. Press PEAK key and hold, then press POWER key and release.
In this setting;
UNIT : Change sign, number and memory mode
PEAK : Change the setting content
ZERO : Shift the digit
MEM : Register the setting content
6.Feature and Operation
6.1.Overview of operation
1. Basic operation
2. Special operation