12
NOTE
all keys in a sequence (up to and including the
e
)
must be pressed within 10 seconds of each other. If
incorrect keys are pressed wait 10 seconds and then enter
the sequence again.
USING A PRESCO™ KEYPAD WITHOUT
E
KEY
When using a keypad that does not have an
E
key (VR43,
VR62 or PSE), simply use the
#
key instead of
E
at the
end of the sequence, all other steps remain the same.
CLEAR ALL USER CODES.
All the user codes memories (000 to 399) can be cleared by
the use of the following sequence.
#
8
7
6
5
E
RESET TO FACTORY DEFAULTS.
The PAC1 can be reset to factory defaults by the use of the
following sequence.
WARNING:
Using this code will delete all user codes, the
management code and reset memories 80 to 99 back to
their factory default settings.
To reset the PAC1 to factory defaults…
#
8
7
6
5
4
3
2
1
E