13
Rev. 2 – 1
st
August 2017
If the fan type or size is wrong the access to the saving configuration button will be grayed out.
Fig. 28
10.
Load Configuration
The configurations previously saved in the “Save Configuration” page can be found in the “Load Configuration” page.
Fig. 29
Once selected the desired configuration, it can be uploaded into the fan.
A configuration can be deleted by pressing the remove button, but it is possible only for the custom configurations.
11.
Analysis
Selecting a PID mode in the Configure page it is possible to access to the PID parameters in the Analysis page and check the
behavior of the fan (for a fast PID tuning explanation refer to the fan manual).
Reference to be expressed in 0.1Volt
PID parameters
Suggestion for the PID parameters
Fig. 30
