www.nicolaudie.com
Sunlite Touch-sensitive Intelligent Control Keypad
Ref. STICK-KE2
© Nicolaudie-Sunlite 1989-2019. All rights reserved. We reserve the right without notice to amend the technical information and specifications.
Page 3
V 1.9
11 mm
106 mm
146
mm
1
2
3
4
A B C D E
5
6
7
8
Rechargeable
battery LIR2032
Technical datasheet Revision date 10 Jan 2019
Connections
SPECIFICATIONS / CONNECTIONS
Built-in
features
screw-terminal
rear connector
(5 pins)
extension socket
rear connectors
(2x10 pins)
front access
connections
(open cover)
Power Supply
7V DC 0.65A, supplied
•
USB
DMX Output #1
First universe, 512 channels DMX512 output
•
•
DMX Output #2
Second universe, 512 channels DMX512 output
(*)
•
USB
USB 2.0 communication for PC/software
•
Ethernet
Advanced networking features
•
Ports 1 - 8
Contact closure inputs, connect to GND to trigger
•
User interface
14 buttons, 1 fader, 28 leds (Touch-sensitive keypad)
•
power/data leds
SDCARD
MicroSD card for stand alone memory use (supplied)
•
RESET
Push button for reset operation
•
RS232
RS232 Serial communication for external synchronisation
•
Output relay
Automatic Stand by 5V signal
•
Clock
Real time clock and calendar
•
Service
*To replace the Li-Ion rechargeable battery :
1. You need a rechargeable 3.6v LIR 2032 replacement battery
2. Remove the back panel by pulling down and sliding it out.
3. Using a paper clip push the battery from the bottom so it slides out
of its cage.
4. Slide the replacement battery in from the top, making sure the posi-
tive side is facing up.
5. Replace the back panel by pushing it up into place.
Servicable parts include:
•
Memory card - used to store the scenes
•
Battery - used to store the clock/calendar
•
DMX Chips - used to drive the DMX (see p2.)
Touch-sensitive
user interface
Ethernet socket
(RJ45)
Power+DMX
socket
(RJ45)
Extension socket
rear connectors
(2x10 pins)
Screw-terminal
rear connector
(5 pins)
Front access
connections
mini
usb
reset
button
micro
SD
dmx
led
data
led