www.nicolaudie.com
Sunlite Touch-sensitive Intelligent Control Keypad
Ref. STICK-KE2
© Nicolaudie-Sunlite 1989-2019. All rights reserved. We reserve the right without notice to amend the technical information and specifications.
Page 2
V 1.9
POWER
DC +
POWER
Ground
DMX
Ground
DMX -
DMX +
1 DMX +
2 DMX -
3 DMX2 +
4 POWER
5 DC +
6 DMX2 -
7 POWER
8 GROUND
POWER
+DMX
1.......8
(
(
Ref: SP485ECN-L
MAX485 CSA
DMX universe #1
DMX universe #2
VIN *
GND
IR_RX
3.3V
Relay
DMX2+
DMX2-
DMX1+
DMX1-
GND_DMX
POR
T1
POR
T2
POR
T3
POR
T4
POR
T5
POR
T6
POR
T7
POR
T8
RS232 RX
RS232 TX
2 4 6 8 10 12 14 16 18 20
1 3 5 7 9 11 13 15 17 19
Technical datasheet Revision date 10 Jan 2019
2. Connect the wires
POWER: Connect a 6V to 7V DC 0.6A ACDC supply.
Be sure to not invert the + and the ground.
DMX: Connect the DMX cable to the lighting
receivers (Leds, Dimmers, Fixtures..)
(for XLR: 1=ground 2=dmx- 3=dmx+)
3. Mount the interface on the wall
First, mount the back side of the interface on the wall with 2 or
more screws.
Secondly, plug the connectors :
- DMX and power (connector block or RJ45)
- Ethernet cable (allows LAN connection)
The front panel is mounted by pressing it against the back plate
and then sliding down. 2 screws can then be attached under-
neith to hold the prevent removal.
**CHECK PIN CONFIGURATIONS. APPLYING POWER TO THE DMX INPUT WILL DAMAGE THE CONTROLLER**
**MAKE SURE THE CONTROLLER IS MOUNTED WITHOUT TOO MUCH FORCE BEHIND AS THIS CAN PUSH APART THE GLASS**
POWER+DMX
WITH THE
CONNECTOR BLOCK
EASY INSTALLATION
1. Mount an electrical box inside the wall
The controller can be installed in any standard electrical
backbox. If you use a double size box, you can insert
the power supply inside.
POWER+DMX
WITH THE
RJ45 CABLE
Compatible header connectors:
WURTH ELEKTRONIK ref: 61301021121
MOLEX ref: 10-89-7202
TE Connectivity ref: 1-87227-0
FCI ref: 77313-101-20LF
HARWIN ref: M20-9981046
SAMTEC ref: TSW-110-xx-T-D
FARNELL ref: 1841232
RS ref: 763-6754 673-7534 251-8165
MOUSER ref: 538-10-89-7202
DIGIKEY ref: WM26820-ND
2x10 pins EXTENSION socket
DMX CHIP replacement
EXTENSION socket
* VIN pin 20 is not protected and should
not be used