1208L Analog Input Module
User’s Manual
5
Rev.1.0
3 Installation
This chapter first describes the installation of the device; the installation of the
configuration software is described in section 3.4.
3.1 Warnings
Attention
The device must be installed in compliance with the relevant DIN/VDE
regulations or the relevant national standards. The connection to the
supply voltage must be performed in accordance with VDE 0100 and VDE
0160 or the relevant national standards. Installation should perform by
qualified and technical experienced personnel only.
CAUTION
At the connections of the output channels 1 – 4 (Fig. 1.1, terminal
1
) and
the power supply (terminals
2
,
3
,
5
,
7
) 24VDC main voltage with load
guard band is accessible. The installation of the unit therefore has to be
effected in a switch cabinet or behind a respective cover.
