1208L Analog Input Module
User’s Manual
2
Rev.1.0
This Manual
This manual provides any required information for installation, configuration
and operation of the Nico Technology Ltd. 1208L Analog Input Module.
It exclusively treats the handling of this device. It neither describes the
LonWorks technology by Echelon nor the LonMark profile implemented in
detail. More specific information concerning these subjects can be found in the
documentation of Echelon (
www.echelon.com
) and the LonMark
Interoperability Association (
www.lonmark.org
).
The first part of this manual provides a survey about the device and its
installation in chapters 1 to 3. The 2
nd
part describes the implemented
application for lighting control and its configuration possibilities. Chapter 4
contains a description of the firmware interface while chapter 5 describes the
implemented LonMark Objects in detail providing an outlook of the individual
objects, their tasks and their relevant configuration parameters.
Chapter 6 explains the basics required to connect the objects to each other.
This manual is relevant for all variants of the Nico Technology Ltd. 1208L
Analog Input Module where applications for building automation control are
implemented.
This documentation is subject to modification at any time without prior advice. Nico does not take over any
responsibility for mistakes or inaccuracies in this documentation and eventually occurring consequences.
In any case Nico as well as its representatives and staff are not reliable for eventual defaults, damages caused
indirectly or during use, occurring due to the use or non-usability of the software or the accompanying documentation.
Nico is a registered trademark of Nico Technology Ltd.
Echelon, LON, LonMark, LonWorks and Neuron are registered trademarks of Echelon Corporation. Other name may
be registered trade marks of the respective companies.
