1208L Analog Input Module
User’s Manual
14
Rev.1.0
5 Application Software for Building Automation Control
On the 1208L Analog Input Module an application for building automation
control is implemented, making output functionality as well as analog control
functions available.
Therefore the relevant LonMark profiles stated in Table 4.1 are implemented.
The use of network variables (NV) compiles with the LonMark standard.
SCPT’s are used for parameterization by applying the read/write-memory
method.
Title
Present
Version
Identification
LonMark Application Layer Interoperability
Guidelines
V3.1
078-0120-01D
The SNVT Master List and Programmer’s
Guide
V 8.0
The SCPT Master List
V 8.0
LonMark Functional Profile Analog Output
V 1.0
0521
NV Type Translator Object
Table 4.1 Referring document about LonMark profiles
5.1 System
Scope
The 1208L Analog Input Module is equipped with eight channels for
Analog Output.
The analog outputs of the 1208L Analog Input Module allow the connection
of actuator. An Analog Input (AI) object, according to LonMark Standard
can be assigned to these output and configured.
Furthermore the 1208L can act as constant valve controller. The valve
control either generated by the internal AI object; via an input network
variable.
The 1208L is equipped with eight analog inputs to connect e.g.
Temperature sensor, Humidity sensor, Lux sensor.
5.2 Interoperable
Interface
The LonMark profile
0521
is
realized in the 1208L Analog Input Module.
The network interface remains standardized, clear and especially it is
interoperable. That means, the 1208L Analog Input Module can be used in
connection with network components by other manufactures. The following
