Update: 29.09.2018
Technical changes reserved.
www.nicoengel.de
5 from 9
V.
Setting the worm gear preload
After the running-in phase or prolonged use of the Nic-O-Tilt, the play in the transmission may increase. This
cannot be avoided mechanically. The following steps are necessary to reduce this backlash:
1.
remove the camera angle or extension bar from the turntable.
2.
remove two countersunk screws DIN 7991 - M5x10
(Fig. 1)
Fig. 1
3.
turn the turntable by hand until you can see the clearance on the cheese head screw
(Fig. 2).
Fig. 2
