Unpacking
Prior to opening the packaging check the Tip and Tell Label to ensure the instrument
has not been tipped during transit. If tipped please notify Nickel Electro Ltd or your
local distributor immediately. Remove the product from it packaging. Any damage to the
product notify Nickel Electro Ltd or your local distributor immediately. Retain packaging
over warranty period.
DO NOT LIFT USING THE DOOR OR DOOR HANDLE
Remove the unit from its packaging . Check its condition and
accessories.
Power Lead and Connection to Electrical Supply
Check the electrical supply is compatible with the rating label.
IF IN DOUBT CONSULT AND ELECTRICIAN. THE PRODUCT
MUST BE EARTHED!
Where the mains supply or plug connection differs refer to local
regulations or consult an electrician.
POSITIONING AND LEVELLING
1. The instrument should be placed on a hard surface, in a dry, airy place with low
relative air humidity (maximum 60% RH, no condensation). The ambient temperature
should be +10 to +28˚C.
2. The instrument should not be placed in direct sunlight and near energy sources.
3. The instrument has not been designed to work in highly dusty environments.
4. Once the instrument has been positioned, it needs leveling. Afterwards it should be
inspected using a spirit level put on a fl at part of the unit.
5. The instrument should be placed at least 100mm away from the wall.
6. The instrument should be placed in such a place as to ensure at least a 300mm gap
between the top of the unit and the ceiling.
7. The instrument must not be built-in.
!
!
CLIFTON RANGE DRYING OVEN NE9 SERIES
CLIFTON RANGE DRYING OVEN NE9 SERIES
5
