Dear Customer,
Thank you for purchasing this piece of Clifton Range laboratory equipment. To get the
best performance from your equipment and for your own safety please read these
instructions carefully before use.
General Notes
1. This product is designed for laboratory use only. Always follow good laboratory
practice.
2. If this product is not used in accordance with these instructions then basic safety
protection may be affected.
3. The mains supply cord fi tted to this product is heat resistant and should be re-
placed with an equivalent type.
4. Before using any cleaning or decontamination method please refer to the Mainte-
nance and Cleaning section to ensure the proposed method will not damage the
unit.
5. Connect only to a power supply with the corresponding voltage to that specifi ed
on the rating label positioned on the rear of the unit.
6. Ensure that the power supply has an earth (ground) terminal.
Amendments
Issue 1: March 2013 (Initial Issue)
Symbols
This symbol appears in documents and on equipment to warn
the user that there are hot surfaces on the equipment.
This symbol appears in documents and on equipment to warn
the user that instructions must be followed to ensure correct
or
safe
operation.
Specimen Safety
It is the users responsibility, to ensure that the temperature set on the instrument, is at a
level where no damage is caused to diagnostic specimens used with the equipment. In the
event of this instrument malfunctioning, all specimens within the device should be checked
to ensure no harm or damage to the specimen has been caused.
CLIFTON RANGE DRYING OVEN NE9 SERIES
CLIFTON RANGE DRYING OVEN NE9 SERIES
!
3
