8
LCD SMART BATTERY CHARGER & MAINTAINER
f. For positive grounded vehicles, connect the NEGATIVE (black) clip from
the battery charger to the NEGATIVE (NEG, N, -) ungrounded battery
post. Connect the POSITIVE (red) clip to the vehicle chassis or to the
engine block away from the battery. DO NOT connect the clip to a
carburetor, to a fuel line, or to any sheet-metal body part. Connect the
clip to a heavy gage metal part of the frame or to the engine block.
g. Plug the AC cord from the charger into the electrical outlet.
h. When disconnecting the charger, turn off the charger first, disconnect
the AC cord, remove the clip from the vehicle chassis, and lastly,
remove the clip from the battery terminal.
i. See operating instructions for information on charging duration.
FOLLOW THESE STEPS WHEN THE BATTERY IS
OUTSIDE THE VEHICLE.
WARNING: A SPARK NEAR THE BATTERY MAY CAUSE AN
EXPLOSION. TO REDUCE RISK OF A SPARK NEAR THE BATTERY:
a. Check the polarity of the battery posts. POSITIVE (POS, P, +) battery
posts usually have a larger diameter than the NEGATIVE (NEG, N, -)
battery post.
SAFETY INSTRUCTIONS
