niche-industries.com
11
CHARGING A BATTERY:
1. Ensure that the polarity connection is correct before plugging the
AC cord into the electrical outlet.
a. Position the red clip on the POSITIVE post connector.
b. Position the black clip on the NEGATIVE post connector.
c. Plug the AC cord into the electrical outlet.
d. If the charger is connected incorrectly and there is reverse polarity
or a short circuit is detected, the wrong connection indicator will
start to flash, ( on diagram) and the battery voltage indicator
( on diagram) will display “Err”.
e. If steps (a-c) are connected correctly, the LCD panel will turn on and
display the battery voltage ( on diagram).
f. The charger will automatically select the correct charging voltage
based on the battery voltage type. The 12V or 24V symbol ( on
diagram) will be displayed on the LCD screen depending on the
battery type that is connected to the charger.
g. Press the MODE button ( on diagram) to select from the four
choices:
i. MODE 1 is the normal mode, when chosen the ( ) symbol will
be displayed on the LCD screen. This mode is recommended for
charging batteries in temperatures > 0°C.
CHARGING INSTRUCTIONS
