14
LCD SMART BATTERY CHARGER & MAINTAINER
3. TROUBLESHOOTING if the battery charger is not charging:
a. Make sure all connections are secured.
b. Ensure that the AC cord is plugged into a working electrical outlet.
c. Confirm charger cables are installed with the correct polarity
connections, and that all connections are clean and tight.
d. With the AC power removed and the engine off, check the charge
level of the battery with a DC meter or tester.
e. Take the battery to a qualified technician to ensure that the battery
state of charge has not fallen below the voltage level where it is too
low to charge.
4. MAINTENANCE:
a. When not in use, store the battery charger in a clean, dry, and
secured location – out of reach of children.
b. Coil up cords when not in use.
c. Clean the case and cords with a slightly damp cloth.
d. Clean any corrosion from the clips with a solution of water and
baking soda.
e. Examine the cords, and the unit for any damage after every use, and
replace if necessary.
WARNING: ALL OTHER SERVICE TO THE BATTERY CHARGER
SHOULD BE DONE BY A QUALIFIED TECHNICIAN ONLY.
TROUBLESHOOTING & MAINTENANCE
