22
Emergency power supply
No
Flashing Light Output
For 1 LUCYB flashing light (12V, 21 W)
SPIN Courtesy Light
SPIN/V1 Courtesy Light
12V-21W BA15 socket
12V-21W BA15 socket
Use in acid, saline or potentially explosive
atmosphere
225 x 330 h 100 / 3,3Kg
Nice S.p.a., in order to improve its products, reserves the right to modify their technical characteristics at any time without prior notice. In
any case, the manufacturer guarantees their functionality and fitness for the intended purposes.
All the technical characteristics refer to a room temperature of 20°C (±5°C).
8) Technical characteristics
Type
Technical characteristics: SPIN
Electromechanical gearmotor for the automatic movement of garage doors for residential
use, complete with electronic control unit
Pinion
Diameter 9.5 mm, 28 teeth; for guides SNA11 and guides supplied with SPIN10KCE
Model:
SN6011
Peak thrust
[corresponds to the force necessary to start
a leaf]
9.9Nm
[550N]
4.95Nm
[275N]
Nominal torque
[corresponds to the force necessary to
keep a leaf moving]
Speed under no load
[corresponds to if “Fast” speed is
programmed]
103 rpm
[0,14m/s]
The control unit enables programming 2 speeds equal to approx. 100% - 60% approx.
Nominal torque speed
[corresponds to if “Fast” speed is
programmed]
52 rpm
[0,07m/s]
Maximum frequency of operating cycles
30 cycles per day (the control unit allows up to the maximum described in tables 3 and 4)
Maximum continuous operating time
3 minutes (the control unit limits the continuous operation up to the maximum described
in tables 3 and 4)
Operating limits
In general, SPIN is suitable for the automation of sectional or overhead doors which remain
within the dimensions stated in table 2 and limits specified in Tables 3 and 4.
Max. absorbed power
200W
Insulation class
1 (a safety grounding system is required)
STOP Input
For normally close or normally open contacts or for constant resistance
8,2K
Ω
with self-recognition (any variation from the memorized status causes the “STOP”
command)
Step-by-step Input
For normally open contacts (the closing of the contact causes the “STEP-BY-STEP” command)
Radio AERIAL Input
52
Ω
for RG58 or similar type of cable
Radio receiver
Incorporated
SPIN Power Supply
SPIN/V1 Power supply
230Vac (±10%) 50/60Hz.
120Vac (±10%) 50/60Hz.
Programmable functions
2 ON-OFF functions and 3 adjustable functions (see tables 15 and 17)
Operating temperature
-20°C ÷ 50°C
No
Protection class
IP 40 use only in indoor or protected environments
Dimensions and weight
Recognition functions
Recognition of the type of “STOP” device (NO or NC contact or 8,2K
Ω
resistance).
Recognition the door opening and closing positions and calculation of the slowdown and
partial opening points.
Model:
Guide in SPIN10KCE
SNA11
Type
3-piece profile in galvanised steel
single profile in galvanised steel
Guide length
3.15m
3.15m
Guide height
35mm
35mm
Useful stroke
2.6m
2.6m
Belt width
6m
6m
Belt height
6mm
6mm
Resistance to traction
730N
730N
Guide technical characteristics
