Adapting roof tiles
Use an angle grinder or hammer to make a cut out in
the part of the roof tile that covers the roof bracket,
so that the roof tile can lie flat against the roof base.
It may also be necessary to make a cut out in the roof
tile underneath.
3
2
1
Installing screw pins for mounting solar
panels on sheet metal roofs
1.
Drill holes in the roof tile or use existing holes
2.
Install the screw pin in the truss sufficiently deeply,
(all the threaded section must be screwed in), to
install a seal against the roof sheet. A bitumen
based roof and building sealant can be used - re-
quired for textured (sanded) surfaces
3.
Install the L profile, adjust the height to the other
screw pins
LEK
Bolt M10
Washer
Mounting
L profile
Nut M10
Installing the mounting for installing
solar panels on seamed metal roofs
1.
Install the mounting on the roof according to the
usual rules and practice
2.
Install the L profile with M10 bolt, washer and
nut.
x 10
LEK
LEK
Screw
Coach bolt M10
Installing the mounting for installing
solar panels on felt roofs
1. Install the plate on the roof according to the usual
rules and practice.
PV Solar package
Chapter 4 |
Mounting
12
Summary of Contents for PV 3031 3 kW
