Nibe FIGHTER 1220, Installation And Maintenance Instructions Manual

Page: 36 / 60

Control
FIGHTER 1220
For the Installer
34
Other settings
Menu 8.2.0 Operating mode
Settings regarding auto mode can be made in the sub-
menus to this menu.
O p e r a t i n g m o d e
8 . 2 . 0
Menu 8.2.2 Winter mode temp.
The average temperature when the heat pump is in
auto mode shall switch to winter mode is chosen here.
The circulation pump and immersion heater are acti-
vated. The value is adjustable between 0 and 30.
1 5 ° C
W i n t e r m o d e t e m p .
8 . 2 . 2
Menu 8.2.1 Summer mode temp.
The average temperature when the heat pump is in
auto mode shall switch to summer mode is chosen
here. In summer mode the circulation pump and
immersion heater are blocked, only hot water is pro-
duced. The value is adjustable between 0 and 30.
2 0 ° C
S u m m e r m o d e T e m p .
8 . 2 . 1
U
U
U
Menu 8.1.0 Display settings
Settings concerning language and menu type are set
on the submenus to this menu.
D i s p l a y s e t t i n g s
8 . 1 . 0
Menu 8.1.1 Operation mode types
The menu type is chosen here: Normal, extended or
service.
Normal, covers the normal user's needs.
Extended, shows all menus except the service
menus.
Service, shows all menus, returns to Normal 30
minutes after the last button was pressed.
N o r m a l
O p e r a t i o n m o d e t y p e s
8 . 1 . 1
Menu 8.1.5 Return
Pressing the enter button returns you to menu 8.1.0
R e t u r n
8 . 1 . 5
Menu 8.1.2 Language
Language settings are made here.
S v e n s k a
L a n g u a g e
8 . 1 . 2
Menu 8.1.4 Light intensity
The light intensity in idle mode is set here. The value
is adjustable between 0 and 2. Idle mode occurs 30
minutes after the last button was pressed.
0=shutoff, 1=low, 2=average.
2
L i g h t i n t e n s i t y
8 . 1 . 4
Menu 8.1.3 Contrast
The display's contrast is set here. The value is
adjustable between 0 and 31.
1 5
C o n t r a s t
8 . 1 . 3
N
U
N
N
U
N
U
S
Menu 9.5.17 Return
Pressing the enter button returns you to menu 8.2.0
R e t u r n
8 . 2 . 3