Caution
The start temperature cannot be set to a value that is higher than the
stop temperature.
INTERNET
nibe uplink
internet4.1.3
tcp/ip settings
proxy settings
Here you make settings for connecting
F1255PC BE to the internet.
NOTE
For these functions to work the
network cable must be connec-
ted.
Menu
4.1.3
NIBE UPLINK
request new connection string
serial number
nibe uplink 4.1.3.1
switch off all users
connection string
number of users
Here you can manage the installation's
connection to NIBE Uplink
(
) and see the number of
users connected to the installation via the
internet.
A connected user has a user account in
NIBE Uplink , which has been given per-
mission to control and/or monitor your in-
stallation.
Request new connection string
To connect a user account on NIBE Uplink to your installation, you must request
a unique connection code.
Menu
4.1.3.1
1.
Mark “request new connection string" and press the OK button.
2.
The installation now communicates with NIBE Uplink to create a connection
code.
3.
When a connection string has been received, it is shown in this menu at
"connection string" and is valid for 60 minutes.
Disconnect all users
1.
Mark “switch off all users" and press the OK button.
53
Chapter 3 | F1255PC BE – at your service
NIBE F1255PC
BE
