39
Hook the side plate into the back plate and turn the
front edge in towards the stove body.
2
1
2
Secure the side panel at the front edge using a
screw at the upper edge and a screw at the lower
edge.
Place the type plates with production number
and installation distances on the under side of the
protective plate. Then screw the protective plate se-
curely into place with the plates turned downwards.
Assembling the stove top
Lay the soap stone top (or Steel top, cast iron top)
in place, remember to handle with care. Finish by
placing the hot air grille and cover on the soap stone
top.
Important!
Before the stove is used, it must be inspected by an authorised chimney sweep. Read the “Instructions for
Lighting the Contura 500 series” before lighting the fire for the first time.
GB
