Accessory card AXC 50
An accessory board is required if, for example, a ground
water pump or external circulation pump is to be connected
to GreenMaster-HP at the same time as the indication of
common alarm is activated.
Part no. 067 193
Active/Passive cooling in 4-pipe system ACS
45
Part no 067 195
Auxiliary relay HR 10
Auxiliary relay HR 10 is used to control external 1 to 3 phase
loads such as oil burners, immersion heaters and pumps.
Part no 067 309
BoxManager 230 V
External fire monitoring/fire damper monitoring
as well as Modbus RTU/TCP
This accessory is used when external fire cells need to be
monitored and actuated. It is also used to convert Mod-
bus RTU to Modbus TCP.
Part no. 880 0172
Buffer vessel UKV
UKV 300
Part no. 080 301
UKV 200
Part no. 080 300
UKV 500
Part no. 080 302
Communications module MODBUS 40
MODBUS 40 enables GreenMaster-HP to be controlled and
monitored using a DUC (computer sub-centre) in the
building. Communication is then performed using MOD-
BUS-RTU.
Part no 067 144
Communications module SMS 40
When there is no internet connection, you can use the ac-
cessory SMS 40 to control GreenMaster-HP via SMS.
Part no 067 073
Connection box K11
Connection box with thermostat and overheating protec-
tion.
(When connecting Immersion heater IU)
Part no. 018 893
Docking kit Solar 42
Part no 067 153
Energy measurement kit EMK 300
This accessory is installed externally and used to measure
the amount of energy that is supplied for the pool, hot
water, heating and cooling in the building.
Cu pipe Ø22.
Part no. 067 314
Energy measurement kit EMK 500
This accessory is installed externally and used to measure
the amount of energy that is supplied for the pool, hot
water, heating and cooling in the building.
Cu pipe Ø28.
Part no. 067 178
External electric additional heat ELK
These accessories require accessories card AXC 40 (step
controlled addition).
ELK 26
26 kW, 3 x 400 V
Part no. 067 074
ELK 15
15 kW, 3 x 400 V
Part no. 069 022
ELK 213
7-13 kW, 3 x 400 V
Part no. 069 500
ELK 42
42 kW, 3 x 400 V
Part no. 067 075
Extra shunt group ECS 40/ECS 41
This accessory is used when GreenMaster-HP is installed in
houses with two or more different heating systems that
require different supply temperatures.
ECS 41 (approx. 80-250
m²)
Part no 067 288
ECS 40 (Max 80 m²)
Part no 067 287
Heating coil
This accessory is installed in water seals that are placed
outdoors, and is used to prevent freezing when it is cold
outdoors
Part no. 801 7598
Hot water control
VST 20
Reversing valve, cu-pipe Ø35
(Max recommended power,
40 kW)
Part no 089 388
49
Chapter 10 |
Accessories
GreenMaster-HP
10 Accessories