©
National Instruments Corporation
17
NI WSN-3202 User Guide and Specifications
WSN Connect Button
Note
Refer to your NI WSN gateway documentation for detailed instructions about how to connect
a NI WSN-3202 to the NI WSN gateway.
The NI WSN-3202 is equipped with a WSN connect button as shown in Figure 13. The button controls
network connection and the LEDs, which display connection status.
Pressing the WSN connect button results in the device responses shown in Table 2.
Reset Button
The NI WSN-3202 is equipped with a reset button as shown in Figure 13.
Pressing the reset button results in the following device responses:
•
When pressed for fewer than five seconds, the device reboots with the current configuration.
•
When pressed for five seconds or more, the device reboots into Factory Default Mode, which
returns the device user configuration to the factory-set defaults.
Table 2.
WSN Connect State/Device Status
Current Device State
Duration of Button Press
Result
Initial power on,
not connected
Any duration
Node turns on and searches
for an available network.
Connected to a
NI WSN-9791
<5 seconds
Node blinks all four signal
strength LEDs twice, and
then displays the signal
strength as shown in Table 1.
5 seconds
Node leaves current network
and searches for a new
network.
