Table 1. Kit Contents by Configuration (Continued)
Configuration
Included Items
IF and mmWave instrument,
which includes two mmWave
radio heads, each with one of the
following port configurations:
•
Direct TRX Ports (0-1)
•
Switched TRX Ports (0-7),
Direct TRX Port (8)
•
Switched TRX Ports (0-15)
•
Modules:
–
PXIe-5820
–
PXIe-3622
–
PXIe-5653
–
mmRH-5582 (x2)
•
Cables:
–
SMA (m)-to-SMA (m) cable, 304.8 mm
–
SMA (m)-to-SMA (m) cable, 1 m (x6)
–
MMPX (m)-to-MMPX (m) cable, 200 mm
–
MMPX (m)-to-MMPX (m) cable, 152 mm (x8)
–
MMPX (m)-to-SMA (m) cable, 152 mm (x2)
–
1.85 mm (m)-to-1.85 mm (m) cable, 200 mm
–
Mini HDMI-to-Mini HDMI cable (x2)
•
AC power supply adapter for mmRH-5582 (x2)
Other Equipment
There are required items not included in your kit that you need to install or operate the
PXIe-5831. Your application may require additional items not included in your kit to install or
operate your hardware.
Required Items
•
A PXI Express chassis and chassis documentation. To ensure specifications are valid, NI
recommends using the PXIe-1095 Chassis or PXIe-1092 Chassis for your hardware. For
more information about compatible chassis options, refer to
•
A PXI Express embedded controller or MXI controller system that meets the system
requirements specified in this guide and chassis documentation.
Optional Items
•
A 0.9 N · m (8 lb · in.) calibrated torque wrench, 5/16 in. (NI part number 751120-01).
Preparing the Environment
Ensure that the environment you are using the PXIe-5831 in meets the following
specifications.
Operating ambient temperature
0 °C to 45 °C
Operating relative humidity
10% to 90%, noncondensing (IEC 60068-2-56)
4
|
ni.com
|
PXIe-5831 Getting Started Guide
