NI PXIe-3621 Getting Started Manual Download Page 1

Page: 1 / 28

GETTING STARTED GUIDE

PXIe-5830

5 GHz to 12 GHz, 1 GHz Bandwidth, Vector Signal Transceiver

Note

Before you begin, install and configure your chassis and controller.

This document explains how to install, configure, and test the PXIe-5830. The PXIe-5830 is
an RF vector signal transceiver (VST). You can program the PXIe-5830 instrument using
RFmx or NI-RFSA and NI-RFSG driver software.

The PXIe-5830 instrument configuration comprises the following modules:
•

PXIe-5820 Vector Signal Transceiver

•

PXIe-3621 Vector Signal Up/Down Converter

There is no single instrument labeled "PXIe-5830."

Contents

Verifying the System Requirements..........................................................................................2
Unpacking the Kit..................................................................................................................... 2

Verifying the Kit Contents................................................................................................ 3

Preparing the Environment....................................................................................................... 4
Choosing and Installing the Software....................................................................................... 5

Software Options...............................................................................................................5
Installing the Software...................................................................................................... 5

Installing the PXIe-5830........................................................................................................... 6

Interconnecting the PXIe-5830 Modules.......................................................................... 8

Direct Connections to the PXIe-5830..................................................................................... 10
Configuring the PXIe-5830 in MAX...................................................................................... 10
Self-Calibration....................................................................................................................... 11

Performing a Self-Calibration Using NI-RFSA.............................................................. 11

Locating the Software and Examples......................................................................................13

Software Locations......................................................................................................... 13
Programming Examples Locations................................................................................. 15

Making a First Measurement.................................................................................................. 16
Troubleshooting...................................................................................................................... 17

What Should I Do if the PXIe-3621 Does Not Appear in MAX?.................................. 17
Why Is the ACCESS LED Off When the Chassis Is On?...............................................17
What Should I Do if the PXIe-5830 Fails the Self-Test?................................................18
What Should I Do if the Instrument Does Not Initialize?...............................................18

Summary of Contents for PXIe-3621





























Search results

Summary of Contents for PXIe-3621

Reviews:

Related manuals for PXIe-3621

Brands by name

Popular brands

NI PXIe-3621, Getting Started Manual

Search results

Summary of Contents for PXIe-3621

Reviews:

Related manuals for PXIe-3621

Brands by name

Popular brands