manualshive.com logo in svg

NI PCI-5122, Getting Started Manual

Share
Download
NI PCI-5122 Getting Started Manual Download Page 14

3.

Power off the chassis.

4.

Reinstall the failed module in a different slot.

5.

Power on the chassis.

6.

Perform the self-test again.

Thermal Shutdown Error

If you receive an over-temperature or thermal shutdown error and your device shuts down,
complete the following steps to re-enable your device:
1.

Power off the computer or chassis that contains the device.

2.

Reinstall the device and make any necessary adjustments to make sure that the device is
effectively cooled.

3.

Power on the computer or chassis.

Note

 

The thermal shutdown error is reported until the device has cooled to an

acceptable operating temperature and has been successfully reset.

For more information about cooling the device, refer to the 

Maintain Forced-Air Cooling

Note to Users

 included in your kit.

Related Information

Installing the PXI/PXIe-5122

 on page 5

Installing the PCI-5122

 on page 6

14

  | 

ni.com

  | 

NI PXI/PXIe/PCI-5122 Getting Started Guide

Summary of Contents for PCI-5122

















Reviews:

No comments

Brands by name

Popular brands

Load more brands