1. Align the cRIO-9065 and the DIN rail clip.
2. Fasten the DIN rail kit to the cRIO-9065 using the screwdriver and M4 × 25
flathead screws. NI provides these screws with the DIN rail mounting kit.
Tighten the screws to a maximum torque of 1.3 N · m(11.5 lb · in.).
Note
You must use the screws provided with the NI DIN rail
mounting kit because they are the correct depth and thread for the
DIN rail clip.
Clipping the Device on a DIN Rail
Complete the following steps to clip the cRIO-9065 on a DIN rail.
1
2
1. Insert one edge of the DIN rail into the deeper opening of the DIN rail clip.
2. Press down firmly to compress the spring until the clip locks in place on the
DIN rail.
ni.com
24
cRIO-9065 Features
