important in order the hear a proper stereo soundstage. A good starting point is to create an equilateral triangle
with the listener at the apex. Ideally, the tweeter height should be on axis with your ears. Also, remember that
nearby reflective surfaces can alter impulse response and blur imaging and tonality. See fig. 5 for some
additional guidelines.
Fig. 5 Ideal Monitor Placement
Sweet Spot
D
D
x
1
.5
WALL MOUNTING THE M-00:
The M-00's feature 1/4"-20 threaded inserts (see Figure 1) designed to work with OmniMount's 50/53 Series
bracket systems. The threaded insert hole depth is 9mm, 11/32" or 0.354" deep and when using the
OmniMount 50/53 series, use a 1/4"-20 pan head bolt that is no longer than 1/2”. As the enclosure is made of
an aluminum alloy, it should be noted the metal is soft and it is possible to strip the threads. Make sure the bolt
is secure, but don’t over tighten, when mounting the clamp assembly to the speaker. To find the location of the
nearest OmniMount Dealer, contact OmniMount Systems @ 602-829-8000 or visit OmniMount Systems online
at www.omnimount.com.
USING MULTIPLE M-00’S:
For appropriate commercial uses, as many as 10 M-00's per channel can be daisy-chained by alternately
utilizing the bridged XLR and the TRS jacks. The exact number of M-00's that can be daisy-chained together
depends on the low impedance drive capability of the mixer or distribution amplifier. Please refer to the table in
Fig. 6 to make your determination. Fig. 7 shows the connection options.
Fig. 6 M-00 Impedance Table
PUSH
PUSH
From
source
or
or
or
or
or
Signal Flow Direction
Etc!
Fig. 7 Daisy Chain Connection Diagram
# of M-00’s
2
3
4
5
6
7
8
9
10
Impedance
(Kohms)
16.0 10.7 8.0 6.4 5.3 4.6 4.0 3.6 3.2