background image

Safety Instructions – Please Read First

 

CAUTION:  To reduce the risk of electrical shock, do not remove the 
cover.  No user serviceable parts are inside; refer for servicing to qualified 

personnel.

WARNING:  To reduce risk of fire or electric shock do not expose this 
appliance to rain or  moisture.

                                                        

 

This symbol wherever it appears, alerts you to 
the presence of un-insulated dangerous 

voltage inside the enclosure that may be 
sufficient to constitute a risk of electric 

This symbol, wherever it appears alerts you to 
important operating and maintenance 
instructions in the accompanying literature.  
Read the manual.

 

DETAILED SAFETY INSTRUCTIONS: 

 

All the safety and operation instructions should be read before the appliance is operated. 

 

Retain Instructions: 

The safety and operating instructions should be retained for future reference. 

 

Heed Warnings: 

All warnings on the appliance and in the operating instructions should be adhered to. 
 

Follow Instructions: 

All operation and user instructions should be followed. 

 

Water and Moisture: 

The appliance should not be used near water (e.g. near a bathtub, washbowl, kitchen sink. laundry tub, in a wet basement, or near a swimming pool etc.). 

 

Ventilation: 

The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be 

situated on a bed, sofa, rug, or similar surface that may block the ventilation openings, or placed in a built-in installation, such as a bookcase or cabinet that 

may impede the flow of air through the ventilation openings. 
 

Heat: 

The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including other amplifiers) that 

produce heat. 

 

Power Source: 

The appliance should only be connected to a power supply of the type described in the operating instructions or as marked on the appliance. 

 

Grounding and Polarization: 

Precautions should be taken so that the grounding or the polarization means of the appliance is not defeated.  
 

Power Cord Protection: 

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular 

attention to cords and plugs, convenience receptacles and the point where they exit from the appliance. 

 

Cleaning: 

The appliance should only be cleaned as recommended by the manufacturer. 

 

Nonuse Periods: 

The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.  

 
Object and Liquid Entry: 

Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 

 

Damage Requiring Service: 

The appliance should be serviced by qualified service personnel when; 

 

The power supply cord or the plug has been damaged; or 

 

Objects have fallen, or liquid has been spilled into the appliance; or 

 

The appliance has been exposed to rain; or 

The appliance does not appear to operate normally or exhibits a change in performance or, the appliance has been dropped, or the enclosure 

damaged. 

 
Servicing: 

The user should not attempt to service the appliance beyond what is described in the Operating Instructions.  All other servicing should be referred to 

qualified service personnel.

 

 

 

 

Summary of Contents for M-00







Reviews: