Tips for Optimal Performance of the CLINOXX-NHT-10
5
The CLINOXX-NHT-10 should remain upright during use and storage.
The CLINOXX-NHT-10 should be operated in a clean environment.
Excessive dust and moisture can affect optimal performance.
Environmental temperatures for operation should remain between 50°F
and 99°F.
The CLINOXX-NHT-10 should not be moved while in operation.
The CLINOXX-NHT-10 should not be turned on with the flow meter
turned off or less than “0”.
The CLINOXX-NHT-10 will make an exhaust sound while in operation.
The CLINOXX-NHT-10 will vent hot air from the bottom of the unit;
please do not block the vent. Blocking the vent increases risk of fire.
The CLINOXX-NHT-10 should be used for 30+ minutes at each session.
Running the concentrator for short bursts can damage the components over
time.
Do not use the CLINOXX-NHT-10 if the power cord is damaged, the
concentrator has fallen or has been submerged in water.
If any of the above occurs, the unit is working incorrectly or abnormally,
please contact your DME or home health company.
Do not move the CLINOXX-NHT-10 by pulling the power cord.
Do not insert foreign objects into any openings.
Do not block inlets, vents or exhaust ports of the CLINOXX-NHT-10.
Do not place the CLINOXX-NHT-10 on soft surfaces such as beds, sofas,
blankets or cushions, this is a fire hazard.
Do not overfill the humidifier water bottle. This may cause water to enter
the cannula or oxygen outlet port.
Please place the CLINOXX-NHT-10 at least 15 inches away from walls,
curtains and other solid surfaces.
Do not stack objects on top of the CLINOXX-NHT-10.
Do not use parts, accessories, or equipment not approved by NHT.
Do connect the concentrator in parallel or series with other oxygen
concentrators or oxygen therapy devices.
Only use the CLINOXX-NHT-10 power cord made specifically for this
device.
