18
• Operate in strict accordance with the instructions of the CLINOXX-NHT-10 series oxygen
concentrator instruction manual to ensure that the device is not subject to electromagnetic
interference.
• Keep other devices away from this device to reduce the effects of electromagnetic
interference.
• The effect of electromagnetic interference can be mitigated by adjusting the relative
position/mounting angle between the device and other devices.
• Reduce electromagnetic interference by changing the wiring location of other device
power/signal cables.
• Reduce electromagnetic interference by changing the power path of other devices.
This device is intended for use in the electromagnetic environment specified below. The
user of this device should make sure it is used in such an environment.
Solutions to common problems with
electromagnetic compatibility:
GUIDANCE AND MANUFACTURER’S DECLARATION –
ELECTROMAGNETIC EMISSIONS:
RF emissions CISPR 11
The device uses RF energy only for its internal
function. Therefore, its RF emissions are very low
and are not likely to cause any interference in
nearby electronic equipment.
The device is suitable for use in all establishments,
including domestic establishments and those
directly connected to the public low-voltage power
supply network.
Group 1
RF emissions CISPR 11
Class B
Harmonic emissions
IEC 61000-3-2
Class A
Voltage
fluctuations/Flicker
emissions IEC 61000-3-3
Complies
EMISSIONS TEST
COMPLIANCE
ELECTROMAGNETIC ENVIRONMENT-GUIDANCE
