2
Tools Required (not supplied)
Tools Required (supplied)
Wire Terminating Tool
Risk of damaging the device in case the product is dropped or damaged in any way it is recommended to replace the complete product.
Installation standards must be respected.
WARNING:
Risk of electrocution, burns or injury to persons and / or damage to equipment.
This Installation Manual is intended for personnel trained in the installation and commissioning of this product. For further details refer to the product
instruction manual for the C55 & C65 and refer NHP documentation.
ATTENTION:
•
This product must always be installed and commissioned by qualified and approved personnel.
•
Maintenance and servicing operations should be performed by trained and authorized personnel.
•
Do not handle any control or power cables connected to the product when voltage may be, or may become present on the product, directly through
the mains or indirectly through external circuits.
•
Always use an appropriate voltage detection device to confirm the absence of voltage.
•
Ensure that no metal objects are allowed to fall in the cabinet (risk of electrical arcing).
T8
Screwdriver Phillips Ph #1
Screwdriver Flathead
Wire Strip &
Crimp Tool
Terminal Screwdriver
T1
T2
T3
T4
Drill
T5
T6
Applicable
Cutting Tool
T7
Ruler or
Tape Measure
Non contractual document.
Subject to change without notice
Summary of Contents for ATYSC CIPACB Series
Page 24: ...24 Legend 16...
