Telephonic Car Alarm & Remote Starter
User’s Manual
New Generation Technology - The Telephonic Car Alarm & Remote Starter - www.ngtwindsor.com
2
1.0 Overview
The Telephonic Car Alarm and Remote Starter is a newly developed alarm system under a patent protection.
The alarm system consists of 5 components:
1. Central control processing unit (GRA 02)
2. Cell phone in a protective box (W.COM 02)
3. Remote control (R.C. 402)
4. Immobilizer relays
5. SS 02 Shock Sensor
2.0 Remote Control Functions:
• Pressing button # 1 once: turns alarm on and uploads the first user’s
telephone number into memory (in case of alarm, the notification goes
out to this number) (note: once this is pressed, buttons # 2 or # 3
can’t be pressed, since they have become inactive.) Only by turning
the alarm off (press button # 4) will the user be able to switch to
button # 2 or # 3.
• Pressing button # 2 once: turns alarm on and uploads the second
user’s telephone number into memory. (Note: same as previously
noted)
• Pressing button # 3 once: turns alarm on and uploads the third user’s
telephone number into memory. (Note: same as previously noted)
• Pressing button # 4 once: deactivates alarm
• Holding button # 1 down continuously (at least for 1.5 seconds):
activates PANIC ALARM (horn (siren) + lights)
3.0 Remote Control Functions for System Programming
• Pressing button # 2 for 4 to 7 seconds: enables the following system modes:
3.1 Vibration Test Mode
“VIBRATION TEST” FUNCTION is activated for 2 minutes. In this mode a test and check can be done on the proper
operation of the vibration sensors’ optimal sensitivity, without having to use the automatic self-adjusting system. The
adjustment is accurate when by tapping on the windshield or on the roof the MONITOR LED turns on for about 5
seconds, then turns off. Upon repeated tapping it turns on. This way a can a test can be conducted on the car as to
its sensitivity at various spots. This function is automatically cancelled in 2 minutes.
3.2Phone Number/Remote Programming Mode
PROGRAMMING THE TELEPHONE: we have the same 2 minutes to assign the preprogrammed telephone numbers
to the remote control, that’s the only way for the alarm system to call the driver. The precise sequence of
PROGRAMMING is available in Section 10.0 “PROGRAMMING THE TELEPHONE”.
