NF HSA42011, Instruction Manual

Page: 20 / 86

2.1 Checking Before Use
HSA42011 2-2
2.1 Checking Before Use

Safety check
To ensure safety in using this product, the user should read the following sections of this
instruction manual before using this product:
 " Safety Precautions "
(provided at the beginning of this instruction manual)
 " 2.3 Grounding and Power Supply Connection "

Appearance and accessories check
If an abnormality (such as a flaw or dent) is found on the outside surface of the corrugated box,
carefully check if the product is adversely affected when removing the product from the corrugated
box.
After opening the corrugated box, check the items contained in the box.
If an abnormality such as a flaw or dent is found on the product or an accessory is missing, contact NF
Corporation or its representative.
 Appearance check
Check that no abnormalities such as a flaw and dent are found on the panel, controls, connectors, and
so forth.
 Accessories check
The accessories of this product are listed below. Check that there are no missing items and no flaws
are found.
This product contains high-voltage parts. Never remove the cover.
All internal inspections of this product are to be performed only by service technicians qualified by
NF Corporation.

Instruction manual (This document) 1

Power cord set
(varies depending on destination, 7 A/125 V for Japan, 2 m, with 3-prong plug) 1

BNC cover (Installed on this product) 2
！
WARNING