5
Wall Mounting
Operation
Basic Settings
1. After installing the batteries, the display should flash the word
“
ENGLISH
”. If not, press and hold button for approximately
4 seconds.
2. Select the desired language using or buttons. Press
DELETE
button to confirm.
3. Select the desired contrast setting (2=Default) using or buttons.
Press
DELETE
button to confirm.
4. Set the hour (00-12) using or buttons. Press
DELETE
button
to confirm.
5. Repeat to set minute, month and day.
6. Set the
TONE/PULSE
using or buttons. Press
DELETE
button
to confirm.
If you wish to change the language, contrast, time settings at a later
date, press and hold button for approximately 4 seconds and repeat
steps 2-6 above.
When the telephone is not in use, the date and time, number of new and
total number of calls stored in the Caller ID memory will be shown on the
display. The display will show the caller number (and name if available).
Making A Call
1. Pick up the handset or press button (the LED will light) and wait
for a dial tone.
2. Dial the number you wish to call. The display will show the number
that you are dialing. If you dial a number over 14 digits long, it will
show the last 14 digits only.
3. When you have completed your call, hang up the handset or press
button again to release the telephone line.
It is possible to switch from a handset to speakerphone conversation by
pressing the button and picking up or hanging up the handset
accordingly.
Pre Dialing A Call
1. Dial the number you wish to call. To correct a number press
DELETE
button for each incorrect digit.
2. Pick up the handset or press button or
CALL BACK
button.
Receiving A Call
When you receive a call, the telephone rings, the Ringer LED flashes,
and the display shows the
CALL#
and the caller telephone number
(when caller ID service is activated). This feature allows you to decide to
pick up the phone or not depending on who is calling.
If you want to talk to the caller:
1. Pick up the handset or press button to answer the call.
2. At the end of the call, return the handset to the cradle or press
button again.
