Nexx SX.COM, User Manual

Page: 11 / 162

SX.COM
11
English
5. PAIRING AND USING THE SMH3 WITH BLUETOOTH DEVICES
Mobile Phone Pairing
1 Turn on the SX.COM and press and hold the (+) Button for 5 seconds
until the LED flashes red and blue alternately and you hear multiple
beeps. You will hear a voice prompt saying “
Phone pairing ”.
2. Search for Bluetooth devices on your mobile phone. Select the NEXX
SX.COM in the list of the devices detected on the mobile phone.
3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
4. The mobile phone confirms that pairing has completed and the
SX.COM is ready to use. You will hear a voice prompt from the
SX.COM saying “
Your headset is paired
”.
5. If the pairing process is not completed within three minutes, the
SX.COM will return to stand-by mode.
5. PAIRING AND USING THE SX.COM WITH
BLUETOOTH DEVICES
Multipoint Mobile Phones Pairing
You can simultaneously use two mobile phones which use the mobile
phone profile.
1. You can pair the first mobile phone to the SX.COM by following the
simple procedures in “Mobile Phone Pairing”.
2. To pair the second mobile phone, press and hold the (-) Button for 5
seconds until the red LED is rapidly flashing and you hear multiple
beeps.
3. Within 2 seconds, press and hold the (+) Button for 1 second, then
the LED turns to blue flashing and the beeps turn to high tone double
beeps. You will hear a voice prompt saying “
Multipoint pairing ”.
4. Search for Bluetooth devices on your mobile phone. Select the NEXX
SX.COM in the list of the devices detected on the mobile phone.
5. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
6. The mobile phone confirms that pairing has completed and the
SX.COM is ready to use. You will hear a voice prompt from the
SX.COM saying “
Your headset is paired ”.