Nexus Wind Data, Installation And Operation Manual

Page: 9 / 79

8
1.2 Installing cable
The power cable is connected via a 3A fuse from the battery or at the
boats fuse panel and direct to the instrument or Server. One red and one
black power wire is included.
Note , set C71 On (see 5.5.1)
Always connect a 3 AMP fuse between Power supply and
instrument.
1.3 Connections in Nexus Network
If you already have a Nexus Network i.e. a Server, it is more practical to
connect the transducer to the Server due to the single instrument cable
installation.
Note , set C71 OFF (see 5.5.1)
The instrument is then connected to the Server’s Nexus Network terminal
(pin 5, 6, 7 and 8) or any instrument .
Server
Transducer
3A Fuse
Black
Screen
Red
Green Yellow
White
2: INSTALLATION