Nexus FDX-kit, Installation And Operation Manual

Page: 6 / 50

NexusRace SW English
5
1 Function overview
The functions in the XL20 and XL30 Instruments are divided into 20 pages.
Each page is configurable for lead text, function, unit, dampening and update rate.
When using the Nexus Race SW, it is also possible to create a page that toggles
between two functions, select update rate, change the name of the function, select
backlight colour etc. etc. see chapter 7.
It is also possible to have the same function on two or more pages but with different
damping or unit. As an example you may set-up three Boat speed pages on the top
instrument with three different dampening, by selecting page, you will then select boat
speed with three different damping.
Damping and unit may be global (same damping and unit on all instruments) or local
(individual for each instrument)
When an instrument is selected from the Multi Control, the top row (indicating the
function) is flashing for 3 seconds. Every time the function is changed, it starts to flash
to indicate which instrument that is active.
The NXR Multi Control Instrument is both a Full Functioning Display as well as the
remote control for the XLR instruments.
NXR is also fully compatible with the NX2 system and the NX2 Multi XL may be
controlled by the NXR Multi Control.
In a NXR system, all calibrations and setting are made from a PC, using the Nexus
Race SW. There are some setting and calibrations that may be done from the NXR
Multi Control and they are: Calibration of BSP, set Heel and Pitch to zero, make an
automatic deviation, set the compass A-fault and adjust the offset of the true wind
angle. Damping and units may also be changed from the Multi Control and affect the
whole system.