Nexus FDX-kit, Installation And Operation Manual

Page: 29 / 50

English NexusRace SW
28
6.4.1 Secondary function
You may choose to toggle between two functions. With the
display time you can select if you want the secondary function to
be displayed 25%, 50% or 75% of the time. The total period is 4
seconds. If 50% is selected, the main function will be displayed 2
seconds and secondary function 2 seconds.
Hint:
If you want one function displayed all the time but you want the
lead text to toggle, you can select the same function as main and
secondary function and type in two different display texts for the
two. For boat speed the main function displays BOATSPEED and
the secondary function displays
–KNOTS-.
If you want a toggling text, it is important that the damping, rate
and unit is the same for the main and secondary function. If you
select different settings for these three, the function will display
different readings when it toggles.
6.4.2 Global damping
If you want all readings of a function to have the same damping
through out the whole system, you should set them to global
damping. All the functions that are able to dampen, BSP, wind
angles and wind speeds, etc. are set to global damping in the
Multi Control instrument.
In the Display setting of the XL, you may select any damping but
you can also select also global damping.
If global damping is set, the corresponding function will be
dampened according to the damping selected in the global
damping display window.