5
Assembling the Installation Bracket
For these steps you will need the following parts:
•
(2) Installation Brackets
•
(4) Fine Adjustment Brackets
•
(12) 10-32 x 9/16” FHMS (Flat Head Machine Screw)
•
(32) #10 x 1” THWS (Optional; Alternate Screws may be used in place of these)
•
(1) 1/8” Allen Key
Reference the Dimensional Drawing to ensure your ceiling cutout is sized properly.
The dimensional drawing can be found on our website:
www.tvlift.com
Step 1:
Fasten (2) Fine Adjustment Brackets
to each Installation Bracket using the 10-32 x
9/16” FHMS Screws.
Step 2:
Place (1) Installation Bracket into the
Ceiling Cutout with the Fine Adjustment Brackets
located in the front and back of the cutout.
