iR1200 Modem
27
The following table contains the steps for powering up the modem for a building
installation:
1
Insert the Ignition Sensor Shorting Plug into the 4-prong IGNITION
jack located in the rear panel of the modem (refer to Figure 3)
2
Plug the AC power cord into a standard 2 prong polarized wall
socket.
3
The STATUS LED light will first blink Red. This indicates that the
modem is searching for a signal within in the Nextel network.
4
A blinking green light indicates that a signal has been found and the
modem was successful in making a connection.
5
The STATUS LED should be blinking Green within 3 minutes from
the time the vehicle’s ignition was turned ON.
Communication Indicators
Your
iR1200 Modem is equipped with LED indicators (located on the front panel) that
identify various communication functions.
Figure 7 – iR1200 Front Panel Layout
The following table contains the descriptions of the LED indicators and their functions.
Signal
Color
Indication
T x
Flickering
Modem is transmitting data to the user (host) system.
