NextBase 512GW Ultra, Instruction Manual

Page: 12 / 43

CAMERA - PARTS & CONTROLS (CONTD.)
Top:
13. Rear Camera input (located under the dust cover)
Used to connect an auxiliary rear camera (sold separately), contact your local Nextbase dealer
for availability.
Note:
- Failure to use the approved Nextbase Rear Camera, will result in damage being caused
which will not be covered under the manufacturers warranty.
14. DC-IN & USB socket (located under the dust cover)
Connect the supplied car power cable or USB data cable here.
Note:
- Normally the car power cable is connected to the mount when in use, not directly to
this socket.
Bottom:
15. Light Sensor
Detects the ambient light level and will adjust the screen brightness accordingly. Turned on and
off within the Setup Menu.
16. Reset button
In the unlikely event the Dash Cam becomes unresponsive, press the RESET button to
restart the Dash Cam.
16
12
13 14
15