NEXTBASE REPLAY SOFTWARE FOR MAC (CONTD.)
Using the NEXTBASE Replay:
To use the NEXTBASE Replay software to view your recorded files, you need to add the files to the
players ‘file list’. This is a very simple process, but first you need to have the files available upon your
computer.
This can be done in two different ways, from the iN-CAR CAM using the supplied USB cable or from
the memory card using a card reader.
Connect the iN-CAR CAM to your computer using the supplied USB cable, the iN-CAR CAM will
power on automatically, select Mass Storage by pressing ‘OK’ on your iN-CAR CAM.
Remove the MicroSD Card from your iN-CAR CAM and using a suitable MicroSD adaptor insert
it directly to the card reader on your PC.
Close any pop up messages and/or any media players which may automatically open when video or
photo files stored upon a memory card are detected. Open the NEXTBASE Replay software using
the shortcut on your desktop.
To add videos for viewing with the NEXTBASE Replay click on the ‘
+ ADD
’ button, this will open a
new window allowing you to locate the recordings, see image below.
Using either method (mass storage or memory card), the iN-CAR CAM will be listed as ‘VOLUME1',
the folder within named ‘NBDVR’ contains the video files.
Highlight the required video files and click ‘Open’, this will add the selected files to the NEXTBASE
Replay file list.
Note:
- Avoid copying large quantities of files in one go (i.e. the full memory card in one go), as adding
the files to the play list can take some time depending on file size and/or computer performance.
Click on a file within the file list window to start playback, see the following pages for further
information on using the NEXTBASE Replay.
36
NEXTBASE Replay
0
00:00:00
00:00:00
0
0
X 0:00
Y 0:00
Z 0:00
0
0
0
Cancel
Open
Open
VIDEO
VIDEO
Favourites
Devices
Macintosh HD
All My Files
iCloud Drive
Applications
Desktop
Documents
WORK
Music
Pictures
Movies
Remote Disk
VOLUME1
‘ADD’
button
NBDVR
VIDEO
Map
About
Open
