NextBase 302G Deluxe, Instruction Manual

Page: 28 / 32

TROUBLE SHOOTING (CONTD.)
The SD card in my iN-CAR CAM
can not be read.
I can't delete files on my SD card
within the iN-CAR CAM.
The screen blanks after a few
minutes upon my iN-CAR CAM.
I get the message “Cluster Wrong”
on screen.
I get the message “Card protected”
on screen.
I have turned on ‘motion detection’
and now can’t stop the recording.
When I press the MENU button
nothing happens.
Unresolved issues.
Use a good quality branded SD card between 8GB and 32GB
(suggested) and format the card from with in the SETUP
menu of the iN-CAR CAM.
Check to see if these files are 'protected', if so please follow
instructions to 'un-protect'
The screen saver is set to ON. Change settings to OFF if
required. Default setting is off.
The SD card has been formatted in another device and the
Cluster Size is not compatible. Simply use the MENU, SETUP
option to re-format the SD card from within the iN-CAR CAM.
Remove the SD Card and slide the locking tab away from
the ‘Lock’ position.
The iN-CAR CAM will start a recording whenever motion is
detected, when function is to be turned off firstly shutdown the
iN-CAR CAM and remove the SD card, this will avoid
recording being activated accidentally. Switch back on the and
within the setting menu and turn off the ‘Motion Detection’.
This is normal during recording. Stop the recording before
pressing the MENU button.
If recording re-starts before you can press MENU, then see
the Motion Detection section above.
Reset the iN-CAR CAM to the default settings within the
Setup Menu and try again.
Should the problem persist call the helpline (02920) 866429
or email: support@nextbase.co.uk
28
PROBLEM SOLUTION