NextBase 302G Deluxe, Instruction Manual

Page: 14 / 32

MENUS AND SETTINGS
Each mode (Video, Photo and Playback) has a menu used to access the various options and settings,
press the MENU button on the rear of the device to access the menu, specific to the current mode
selected.
Use the UP, DOWN buttons to select chosen option and press the OK button to confirm.
1. VIDEO MODE
1.1 Resolution
Select recording resolution, this will increase or decrease the quality of the recorded video.
Default Setting: 720P (1280 x 720 @ 30Fps)
1.2 Loop Recording
This feature enables continuous recording of your whole journey to be made, but the
recording is broken down in to manageable bite sized chunks. In the event of an incident you
will always have the latest video footage, for play back later and in a manageable file size.
Each bite sized chunk can be set to either 2, 3 or 5 minutes long.
Default Setting: = 3 Mins
Note:
- When the SD card becomes full of recordings from your journey, the oldest recordings are
deleted automatically, in order to make space for the new recordings (any protected files
are however not deleted).
- The OFF setting is NOT preferred, as this will result in massive file sizes, which are then
unmanageable and risk being corrupted.
1.3 Motion Detection
Turn On / Off the motion detection function, the device will need to remain powered on and
will start a 30 second recording when a change to the viewed scene is detected.
Default Setting: Off
Note:
Motion Detection is NOT required for the recording of normal driving situations. Please do
select On unless strictly necessary.
1.4 G Sensor
Turn Off or adjust the sensitivity of the G Sensor, it is the G Sensor that detects forces
which will automatically protect the current recording in event of a collision.
Default Setting: Medium
1.5 Record Audio
Turn On / Off audio recording.
Default Setting: On
1.6 Exposure
Select exposure, used to adjust exposure level for different light conditions.
Default Setting:
0
1.7 Date & Speed Stamp
Turn On / Off the date and speed stamp shown on recorded files.
Default Setting: On
1.8 Speed Units
Selected required speed units, MPH or KPH.
Default Setting: MPH
14