![Nextar X3-03 - Automotive GPS Receiver Hardware Manual Download Page 23](http://html1.mh-extra.com/html/nextar/x3-03-automotive-gps-receiver/x3-03-automotive-gps-receiver_hardware-manual_1683891023.webp)
22
Troubleshooting
Problem
Possible Cause
Possible Solution
Unit may be inside a tunnel,
inside a building, or tall
buildings may obstruct the
satellite signal
Check for obstructions
Navigator
cannot receive
satellite signals
or does not
orient
Mapping SD card may be
removed for music or photo
functions
Re-install Mapping SD
Card
Rechargeable battery is
weak
Plug in power adaptor and
charge Battery
Unit is moving side to side
too much
Secure unit
Signal is obstructed by
buildings or other materials
Check and correct
obstruction
Satellite signal
strength is
unstable.
Comes and
goes.
System software fails to
function after entering a
command
Turn the unit off and on
again to reset using slide
switch on rear.
Other possibilities
Static or other external interference may cause the unit to function abnormally. In order to
recover normal status, please unplug the power supply cord and then plug it into the
outlet again to reset the unit. If the problems still exist, please cut off the power supply
and consult your service center or a qualified technician.
Summary of Contents for X3-03 - Automotive GPS Receiver
Page 1: ......