April 2018
CNC STONE SHARK | 5
Operations Safety Instructions
1.
Read and follow all safety and operating instructions before using the CNC STONE SHARK. This
includes reading the manual for the spindle that will be mounted on your CNC STONE SHARK. Take
the time to orient yourself to the CNC STONE SHARK and the workflow steps.
2.
Let the machine and spindle come to a complete stop before reaching near the cutting area. Make
sure that power is not applied to the spindle or the CNC STONE SHARK while positioning it on the
work piece or changing the bit.
3.
Always be sure nothing is in the path of the cutter that might interfere with the movement of the
gantry.
4.
Always wear eye and ear protection while operating your CNC STONE SHARK.
5.
Keep miscellaneous equipment off the CNC STONE SHARK table and gantry. This includes areas
alongside the table where the gantry travels.
6.
Never place your hands or fingers into the field of operation while the machine is running.
7.
Position LCD Pendant by hanging it on to the front rail for easy access to the E-Stop button.
8.
Never attempt to manually adjust the work piece while the CNC STONE SHARK and spindle are
running.
9.
Keep the CNC STONE SHARK lubricated and clean. Clean the CNC STONE SHARK and area after each
use. The best lubrication for the CNC STONE SHARK is a dry Teflon, silicone spray applied to the
bearings and lead screws of each axis. Do not use WD40
Summary of Contents for CNC STONE SHARK
Page 1: ...USER MANUAL...