April 2018
CNC STONE SHARK | 12
Machining the Part
The CNC STONE SHARK is to be placed on the material that is to be machined and properly secured using
the vacuum rails powered by the quick attach air fitting on the front right corner. The incremental
cutter is then threaded on to the spindle. Using the CNC STONE SHARK Touch Screen, the tool is moved
(jogged) to X0, Y0, Z0
–
this is typically the top of the countertop and front center of the web or rail.
Once you have it in position you press the Zero xyz button, answer yes to reset zero and this becomes
the starting and stopping place for this cutout.
Next, plug the thumb drive containing the .tap file into the LCD Pendant using the USB port on the right
hand side of the Pendant.
Set new Zero Home
here
Toggle any of the 3 Axis
Control Speed of
Toggle Movement
Summary of Contents for CNC STONE SHARK
Page 1: ...USER MANUAL...