April 2018
CNC STONE SHARK | 14
At this point, all the steps necessary to run the toolpath have been taken.
Next select the ‘Start’ button
and the CNC STONE SHARK will start to machine the part.
You’ll notice you have complete control to
pause and resume should you need to check something. The slide bar for speed override allows you to
compensate for things like denser material than what you had originally designed the program for. And
of course, the E-Stop in case you need to stop everything in a panic. (We d
on’t recommend using the
small
X
to stop the cutting as it can confuse the machine, it is only used to back out to the previous
page)
Summary of Contents for CNC STONE SHARK
Page 1: ...USER MANUAL...