April 2018
CNC Piranha FX/XL | 17
Next verify you have the correct file you are preparing to run, you can see file name, material
size, etc. If everything is correct press Next
At this point, all the steps necessary to run the toolpath have been taken. Next select the
‘Start’ button
and the Piranha FX/XL will start to machine the part.
You’ll notice you have
complete control to pause and resume should you need to check something (remember to turn
router off if your adjusting the work piece) The slide bar for speed override allows you to
compensate for things like denser material than what you had originally designed the program
for. And of course, the E-Stop in case you need to stop everything in a panic.
(we don’t
recommend using the small x to stop the cutting as it can confuse the machine, it is only used
to back out to the previous page)
Summary of Contents for CNC PIRANHA Fx
Page 1: ......
