Nexsan E18X Installation Manual Download Page 37 | Manualshive

Page: 37 / 51

Nexsan E18X Installation Manual Download Page 37

Update the firmware

1. Contact Technical Support (see

About this manual

on page v) and request to be emailed a link to the

latest firmware for your system.

2. In the email you receive, click the download link, then click

Save

in the

File Download

dialog box.

3. In the

Save As

dialog box, select a download location and click

Save

.

4. Find the .zip file on your computer and extract the files from it.

5. Follow the instructions for updating the firmware and Emergency Code firmware in the “Firmware

Update Instructions.pdf” file that came in the firmware .zip file.

Connect the Nexsan Storage Expansion

Depending on your firmware level, you either a) can “hot add” a Nexsan Storage Expansion to a running
Nexsan E-Series Storage System, or b) must power down the Nexsan Storage System to attach the
Nexsan Storage Expansion. See

Prepare the Nexsan Storage System

on the previous page for

requirements.

Hot-add Nexsan Storage Expansions to a powered-up Nexsan Storage System

If you are attaching the Nexsan Storage Expansion to a Nexsan E-Series Storage System with firmware
version Q0x1.1100 or higher, you can “hot-add” the Nexsan Storage Expansion while the Nexsan Storage
System is still powered on and running.

Connecting the Nexsan E32X or Nexsan E18X Nexsan Storage Expansion requires the SAS cables that
shipped with the Nexsan Storage System. See

Unpack the Nexsan Storage System

CAUTION

: The cordset specification for the Nexsan E18X in North America is IEC C13 to IEC C14

rated 110V/15A. When applying power to the Nexsan Storage System, use ONLY the IEC power
cords originally supplied with it. Do NOT use other power cords, even if they appear identical to the
supplied cords.

CAUTION

: The Nexsan E32X/Nexsan E18X does not have power switches. The only way to apply

power to the Nexsan E32X/Nexsan E18X is to attach the power cords. Do NOT attach the power
cords until the Nexsan Storage System is fully installed, with all disk drives in place and all con-
nections to the local area network (LAN) and storage area network (SAN) connected.

CAUTION

: Ensure that the A/C power socket/outlet is near the equipment and easily accessible.

Chapter 3: Installing the Nexsan Storage System

Nexsan E18X and Nexsan E32X
Installation Guide

Nexsan

37

3

«
...
35
36
37
38
39
...
»

Summary of Contents for E18X




















































Reviews:

No comments