ENGLISH
PAGE
21
MENU
DESCRIPTION
USER MANUAL LOAD2_22
DATE: 03/12/2004
0.5dB)
1.4 Mute/Solo
Allows the user to switch the function of the front panel
channel buttons between Mute and solo mode.
Individual channel muting is made in the DSP processor
itself. However, when all 4 MUTE buttons are active the
output relays bypass the circuitry, to eliminate any residual
noise.
1.5 SAVE Set-up
It is possible to store and recall up to 10 user set-ups but
excluding MUTE BUTTONS STATE
.
Additionally the current set-up is saved in case of power
failure every two minutes after the last change. At power up
this set-up is restored.
Set-ups are numbered from 1 to 10. When saving your set-
up you can choose a reference name up to 6 characters for
identification purposes.
NOTE: ALL SAVED SETUPS WILL BE ERASED WHEN
DOWNLOADING A NEW VERSION OF THE
SOFTWARE.
1.6 RECALL Set-up
Recalling a user set-up is forbidden if the family of cabinet
is not the same.
When recalling a set-up, the unit will stay in the recall menu
allowing another selection for comparison. Switching from a
set-up to another is glitch-free and instantaneous (no
muting takes place).
1.7 Array EQ
One array EQ gain control of +/- 6dB (0.5dB step) is
included. This filter frequency is factory tuned.
20
100
1k
10k
20k
-10.00
-8.000
-6.000
-4.000
-2.000
0.0
2.0000
4.0000
6.0000
8.0000
10.000
AlphaTD Controller Array EQ / Frequency (Hz) / Gain (dB)